High technology, high speed pipe mill which offer the best return on investment.
• Two operators to run the mill.
• Speed up to 150 m/min.
• Very quick coil change time.
• Mill is designed to reduce to the minimum size change.
• Minimum scrap in emergency stop and when changing sizes.
• Nearly burr free cutting.
• Full diagnostic system to find fault very quickly and reduce down time.
• Our support would guarantee that client would be able to produce pipe with lowest production cost even if this is their first industrial project.
Entry Section
Automatic entry section for welded pipe mill
Double Decoiler 3Ton
Double decoiler with side support for narrow strip
Double Decoiler 6Ton
Double decoiler with side support for narrow strip, pinch roll and entry table for complete automatic introduction of the strip without any manual handling
Double Decoiler 8 Ton
Double decoiler with side support for narrow strip, pinch roll and entry table for complete automatic introduction of the strip without any manual handling.
Double Decoiler 12 Ton
Double decoiler with side support for narrow strip, pinch roll and entry table for complete automatic introduction of the strip without any manual handling
Double Decoiler 16 Ton
Double decoiler with side support for narrow strip, pinch roll and entry table for complete automatic introduction of the strip without any manual handling
Semi-Automatic Strip Jointer
Manual strip cutting & positioning and automatic welding
4mm Strip Jointer
Automatic head & tail cutting, strip positioning, welding & weld grinding
6mm Strip Jointer
Automatic head & tail cutting, strip positioning, welding & weld grinding
8mm Strip Jointer
Automatic head & tail cutting, strip positioning, welding & weld grinding
8mm Strip Jointer-1
Automatic head & tail cutting, strip positioning, welding & weld grinding
12mm Strip Jointer-1
Automatic head & tail cutting, strip positioning, double welding & weld grinding
Flattener
Flattener for head & tail of the coil
FR22 Vertical Accumulator
Vertical strip accumulator which occupy less space and dose don damage strip edge
FR42 Vertical Accumulator
Vertical strip accumulator which occupy less space and dose don damage strip edge
FK42 Vertical Accumulator
Vertical strip accumulator which occupy less space and dose don damage strip edge
FBS3 Vertical Accumulator
Vertical strip accumulator designed for stainless steel and delicate strip which occupy less space and dose don damage strip edge
HA254 Horizontal Accumulator
High accumulation capacity with rotary table for thin strip
6 inch Horizontal Accumulator
High accumulation capacity and wide strip thickness range
16 inch Horizontal Accumualtor
High accumulation capacity and wide strip thickness range