2011 Design by Kreativa srl

Entry Section

High technology, high speed pipe mill which offer the best return on investment.
• Two operators to run the mill.
• Speed up to 150 m/min.
• Very quick coil change time.
• Mill is designed to reduce to the minimum size change.
• Minimum scrap in emergency stop and when changing sizes.
• Nearly burr free cutting.
• Full diagnostic system to find fault very quickly and reduce down time.
• Our support would guarantee that client would be able to produce pipe with lowest production cost even if this is their first industrial project.

  • Entry Section

    Automatic entry section for welded pipe mill

  • Double Decoiler 3ton

    Double decoiler with side support for narrow strip

  • Double Decoiler 6ton

    Double decoiler with side support for narrow strip, pinch roll and entry table for complete automatic introduction of the strip without any manual handling.

  • Double Decoiler 8ton

    Double decoiler with side support for narrow strip, pinch roll and entry table for complete automatic introduction of the strip without any manual handling.

  • Double Decoiler 12ton

    Double decoiler with side support for narrow strip, pinch roll and entry table for complete automatic introduction of the strip without any manual handling.

  • Double Decoiler 16ton

    Double decoiler with side support for narrow strip, pinch roll and entry table for complete automatic introduction of the strip without any manual handling.

  • Semi-Automatic Strip Jointer

    Manual strip cutting & positioning and automatic welding.

  • 4mm Strip Jointer

    Automatic head & tail cutting, strip positioning, welding & weld grinding

  • 6mm Strip Jointer

    Automatic head & tail cutting, strip positioning, welding & weld grinding.

  • 8mm Strip Jointer

    Automatic head & tail cutting, strip positioning, welding & weld grinding

  • Flattener

    Flattener for head & tail of the coil.

  • FR22 Vertical Accumulator

    Vertical strip accumulator which occupy less space and dose don damage strip edge.

  • FR42 Vertical Accumulator

    Vertical strip accumulator which occupy less space and dose don damage strip edge

  • FK42 Vertical Accumulator

    Vertical strip accumulator which occupy less space and dose don damage strip edge

  • FBS3 Vertical Accumulator

    Vertical strip accumulator designed for stainless steel and delicate strip which occupy less space and dose don damage strip edge

  • HA254 Horizontal Accumulator

    High accumulation capacity with rotary table for thin strip

  • 6 inch Horizontal Accumulator

    High accumulation capacity and wide strip thickness range

  • 16 inch Horizontal Accumualtor

    High accumulation capacity and wide strip thickness range